Page Comparison

...

In this tutorial, we will be demonstrating connectivity from a RediGate 120C to a Mitsubishi MELSEC Q63P processor over a QJ71E71-100 Ethernet communications card. This tutorial can be used to for connecting and any RediGate with a an available device-level Ethernet port to any a MELSEC enabled PLC. 

Pre-Requisites

1. A RediGate 120X or 400 series device with an open Ethernet port
2. Completion of the Getting Started Guide for your respective RediGate device (RediGate 100 or RediGate 400)
3. An Ethernet connection to a QJ71E71-100 or equivalent Ethernet card in the same rack as a Mitsubishi MELSEC PLC. You will need to configure your RediGate's local Ethernet port to be on the same network as the PLCEthernet card, and you should confirm that you are able to ping the PLC card through that port.

Instructions

...