| Expand | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
...
After logging in to the MMI, the Main Manu is displayed.
================ Main Menu ==============ElecSys(V:5.7.2017-07-24-1300) Wed Jul 26 22:20:20 2017UnitName : 1 @ 192.3.1.10 REDIGATE <40170-0118>-SerialNumb---------------------------------------------1) System Services2) Directory Services3) Diagnostics Services
99 Log Off
Make selection:
...
Main Menu → System Services
The System Services menu is used to restart the system, change the system clock, view the status or enable/disable certain RediGate processes.
Enter 1 at the Main Menu for the System Services menu.
================ System Services ==============ElecSys(V:5.7.2017-07-24-1300) Wed Jul 26 22:47:52 2017UnitName : 1 @ 192.3.1.10 REDIGATE <40170-0118>-SerialNumb---------------------------------------------1) Boot/Reconfigure 2) Set Clock3) Channel Status 4) Channel Enable/Disable5) Channel Scan 6) Single Poll7) RTU Enable/Disable 8) RTU Scan9) RPN Calculator 10) New Master Key11) Read Handshake Pins 12) Write Handshake Pins13) Run Custom Utility 14) MQttClient to Next Broker15) Cell Modem Diags
Make selection:
...
Main Menu → Directory Services
The Directory Services menu is used for various file operations within the RediGate file system.
Enter 2 at the Main Menu for the Directory Services menu.
================ Directory Services ==============
ElecSys(V:5.7.2017-08-07-1200) Thu Aug 17 06:32:10 2017
UnitName : 1 @ 192.3.1.10 REDIGATE <46247-0004>-SerialNumb
---------------------------------------------
1) Executables 2) Current Configs
3) Download Directory 4) Put File to Remote
5) Get File From Remote 6) Rename File
7) Delete File in Remote 8) Delete IsaGraf Files
9) View Zombie.log 10) IsaGraf App Info
11) Restore Previous UFF 12) View UFF Processing Details
13) View Load-Store File 14) View kernel or message logs
15) MQtt XML Information 16) View customer settings
17) ZMODEM File to Remote 18) ZMODEM File from Remote
19) View Problem.txt 20) View ModemLog.txt
21) Store-N-Forward File
Make selection:
1- Executables
Main Menu → Directory Services → Executables
...
Make selection: 19
Press 'Q' to quit, SPACE-BAR for next page
Sun Aug 27 15:44:48 CDT 2017
Multiple .xml.gz files cannot be translatedtest1.xml.gz and test2.xml.gz
Sun Aug 27 15:51:25 CDT 2017/home/director/2017-08-07-1200-redigate_7_3.15_32.tar.gz was not tagged for REDIGATEPress ENTER...
20- View ModemLog.txt
...
(The Local IP address indicates a successful connection and the RediGate's address on the cellular network.)→AT+CSQ...OK
<-+CSQ: 13,99\r\n\r\nOK→ATDT#777...CONNECT←CONNECT
Running pppd /dev/ttyEMUX0 230400 file /dev/null modem crtscts lock asyncmap 0 nodetach nodefaultroute noauth usepeerdnsUsing interface ppp0Connect: ppp0 <--> /dev/ttyEMUX0local IP address 75.242.97.94
remote IP address 66.174.62.1primary DNS address 198.224.147.135secondary DNS address 198.224.146.119Press ENTER...
21- Store-N-Forward File
Main Menu → Directory Services → Store-N-Forward
...
Make selection: 21
================ Store and Forward Files ==============ElecSys(V:5.7.2017-08-24-1000) Wed Sep 6 16:35:43 2017RediGate120E : 1 @ 0.0.0.0 REDIGATE <46247-0002>-SerialNumb---------------------------------------------0=/tmp/sdcard1 : 1=/tmp/usb1 : 2=Edit Last Reported Times
Select folder (0,1)? 0
Enter0to select the /tmp/sdcard1 location, then enter the folder name containing the archive files.
Gateway.json SNF14_00003 SNF15_00003 SNF_HELP.txtSNF00_00001 SNF15_00002 SNF15_00004Enter Directory name (e.g. SNF00_00001) SNF00_00001-rwxr-xr-x 1 root root 241 Oct 4 2016 MastChan0~Micro820~20161004CHAN00~RTU-1~20161004.csv-rwxr-xr-x 1 root root 16021 Oct 6 2016 MastChan0~Micro820~20161006CHAN00~RTU-1~20161006.csv-rwxr-xr-x 1 root root 428984 May 22 20:35 MastChan0~Micro820~20170522CHAN00~RTU-1~20170522.csv
Enter name if File to View MastChan0~Micro820~20170522 CHAN00~RTU-1~20170522.csv
After entering the file name, the file will be displayed one page at a time. Press the Space bar to page through the file, or enter Q to quit the display.
Comma-separated values are shown, following a CSV header. The header columns are:
- EpochTime is the timestamp of data in seconds since 1/1/1970 (32-bit integer, based on the system clock at the time); or if the Pacing is set to 0, the column will be EpochTimeMS (a 64-bit integer containing milliseconds since 1/1/1970).
- RegAddr_OR_TagName is either the RTDB register number, or the Tag name if configured for that register.
- Delivered is 1 if the data has already been published to MQTT, or 0 if not published.
- GoodQuality is 1 is the point quality status at the time it was logged (1=online, 0=offline).
- DataType is the type enumeration of the register (1=Boolean, 2=CHAR, 3=UINT8, 4=SINT16, 5=UINT16, 8=SINT32, 9=UINT32, 10=REAL32, 11=STRING-32, 12=STRING-256, 15=REAL64, 16=SINT64, 17=UINT64).
- Value is the register value at the time it was logged. String data might include commas, which would appear as additional CSV columns.
Below is an example of the content of the CSV file containing historical values using EpochTime
...
q
(seconds). The data header is stored in the CSV file every time the connection goes from connected to disconnected state.
This example shows tag names CycleCount, TankLevel, and PumpStatus, and an untagged register address 40001.
The Delivered column is 1=Published or 0=Unpublished. (This value is only saved at the time the data originally stored and is not updated once the historical data is subsequently published.)
The GoodQuality column indicates the Quality flag of the RTDB register at the time it was stored.
The DataType column is 1=Boolean, 5=UINT16, 9=UINT32, 10=REAL32.
The Value column shows the value in the data type. Boolean values are 0 or 1.
EpochTime,RegAddr_OR_TagName,Delivered,GoodQuality,DataType,Value1495429200,CycleCount,1,1,9,9107227331495429214,40001,1,1,5,655351495429220,TankLevel,1,1,10,4.01495429224,CycleCount,0,1,9,9107292181495429229,CycleCount,0,1,9,9107313781495429235,PumpStatus,0,1,1,1
Below is an example with the content of the CSV file containing historical value using EpochTimeMS (milliseconds).
EpochTimeMS,RegAddr_OR_TagName,Delivered,GoodQuality,DataType,Value1529675863415,40001,0,1,8,15296758631529675863415,40002,0,1,8,367
The Store & Forward process keeps track of the date of the last-reported historical record value. Upon reconnected link status of the monitored process, it will begin at this timestamp to publish additional historical values.
You can change the last-reported time to skip forward and not publish some records, or to skip backward and republish older historical records.
From the Directory Services menu option 21, select 2 to Edit Last Reported Times.
Make selection: 21
================ Store and Forward Files ==============ElecSys(V:5.7.2017-08-24-1000) Wed Sep 6 16:35:43 2017RediGate120E : 1 @ 0.0.0.0 REDIGATE <46247-0002>-SerialNumb---------------------------------------------0=/tmp/sdcard1 : 1=/tmp/usb1 : 2=Edit Last Reported Times
Select folder (0,1 or 2)? 2
Enter the Channel Number and Field Unit Address of a unit to change the Store & Forward last-reported date/time.
Chan Name Status Rtus Time
==== ============== ======== ==== ==================
0 CHAN00 Normal 2 Mon Jul 23 12:27:10 2018
2 Master Channel Normal 1 Thu Jul 19 15:16:14 2018
Enter Channel Number (0-15) 0
-----------------RTU---------------- -----POLL------- -------ERRORS-------Addr Name Protocol Status Time Count TimOut BadData Frame----- ---------------- -------- -------- -------- -------- ------ ------- -----1 RTU-1 SOSMST00 PollDone 12:27:14 57304 0 0 0Enter Rtu Address (0 - 65535) 1
Enter a number of days (positive or negative) to adjust the current last-reported time for this Field Unit. Enter a whole number of days, or a fraction (such as -0.5 to skip backward half a day, or 0.04167 to skip forward one hour).
Enter Y to accept the adjusted last-reported time.
Last CSV Time ==> 2018-10-28 12:00:04 LOCAL
DAYs forward (positive) or backward (negative) to adjust (e.g. 0.5 days) 0.04167
New CSV Time ===> 2018-10-28 13:00:04 LOCAL
Is this acceptable as the new reporting time? (y/n) y
...
3- Diagnostics Services Menu
...
Addr Name Dbg? Protocol Status----- ---------------- ---- -------- ------1 DNP3 Field Unit ON DNPMST00 Timeout
Enter RTU Address (-1 for all) ? 1
Enter 0=Disable : 1=Enable [Default=1] ? 1
After entering all information related to the task Debug Level modification, a single line output will indicate the change in status, and the list of tasks will generally be shown again.
Setting Scan-Rtu 1 to Enable Dump
================ Channel Diags ==============ElecSys(V:5.7.2017-08-07-1200) Sun Sep 3 21:17:07 2017
UnitName : 1 @ 192.3.1.10 REDIGATE <46247-0004>-SerialNumb---------------------------------------------Chan Name Status Rtus Time==== ============== ======== ==== ==================0 Channel0 w/Errors 1 Tue Dec 14 09:37:57 19991 Channel0 w/Errors 1 Tue Dec 14 09:37:56 199915 Channel15 Normal 1 Tue Nov 30 06:00:02 1999
Enter Channel (0 to 15) ?
Once you have modified the Debug level for all FieldUnits that you wish to change, press Enter to return to the Diagnostics Services menu, or enter another channel number.
| Anchor | ||||
|---|---|---|---|---|
|
...
Linux Diagnostic Commands
...