Expand | ||||||
---|---|---|---|---|---|---|
| ||||||
|
...
After logging in to the MMI, the Main Manu is displayed.
================ Main Menu ==============
ElecSys(V:5.7.2017-07-24-1300) Wed Jul 26 22:20:20 2017
UnitName : 1 @ 192.3.1.10 REDIGATE <40170-0118>-SerialNumb
---------------------------------------------
1) System Services
2) Directory Services
3) Diagnostics Services
99 Log Off
Make selection:
...
Main Menu → System Services
The System Services menu is used to restart the system, change the system clock, view the status or enable/disable certain RediGate processes.
Enter 1 at the Main Menu for the System Services menu.
================ System Services ==============
ElecSys(V:5.7.2017-07-24-1300) Wed Jul 26 22:47:52 2017
UnitName : 1 @ 192.3.1.10 REDIGATE <40170-0118>-SerialNumb
---------------------------------------------
1) Boot/Reconfigure 2) Set Clock
3) Channel Status 4) Channel Enable/Disable
5) Channel Scan 6) Single Poll
7) RTU Enable/Disable 8) RTU Scan
9) RPN Calculator 10) New Master Key
11) Read Handshake Pins 12) Write Handshake Pins
13) Run Custom Utility 14) MQttClient to Next Broker
15) Cell Modem Diags
Make selection:
...
Main Menu → Directory Services
The Directory Services menu is used for various file operations within the RediGate file system.
Enter 2 at the Main Menu for the Directory Services menu.
================ Directory Services ==============
ElecSys(V:5.7.2017-08-07-1200) Thu Aug 17 06:32:10 2017
UnitName : 1 @ 192.3.1.10 REDIGATE <46247-0004>-SerialNumb
---------------------------------------------
1) Executables 2) Current Configs
3) Download Directory 4) Put File to Remote
5) Get File From Remote 6) Rename File
7) Delete File in Remote 8) Delete IsaGraf Files
9) View Zombie.log 10) IsaGraf App Info
11) Restore Previous UFF 12) View UFF Processing Details
13) View Load-Store File 14) View kernel or message logs
15) MQtt XML Information 16) View customer settings
17) ZMODEM File to Remote 18) ZMODEM File from Remote
19) View Problem.txt 20) View ModemLog.txt
21) Store-N-Forward File
Make selection:
1- Executables
Main Menu → Directory Services → Executables
...
Make selection: 19
Press 'Q' to quit, SPACE-BAR for next page
Sun Aug 27 15:44:48 CDT 2017
Multiple .xml.gz files cannot be translated
test1.xml.gz and test2.xml.gz
Sun Aug 27 15:51:25 CDT 2017
/home/director/2017-08-07-1200-redigate_7_3.15_32.tar.gz was not tagged for REDIGATE
Press ENTER...
20- View ModemLog.txt
...
(The Local IP address indicates a successful connection and the RediGate's address on the cellular network.)
→AT+CSQ...OK
<-+CSQ: 13,99\r\n\r\nOK
→ATDT#777...CONNECT
←CONNECT
Running pppd /dev/ttyEMUX0 230400 file /dev/null modem crtscts lock asyncmap 0 nodetach nodefaultroute noauth usepeerdnsUsing interface ppp0
Connect: ppp0 <--> /dev/ttyEMUX0
local IP address 75.242.97.94
remote IP address 66.174.62.1primary DNS address 198.224.147.135
secondary DNS address 198.224.146.119
Press ENTER...
21- Store-N-Forward File
Main Menu → Directory Services → Store-N-Forward
...
Make selection: 2
================ Network Interfaces ==============
ElecSys(V:5.7.2017-08-07-1200) Sun Sep 3 21:17:07 2017
UnitName : 1 @ 192.3.1.10 REDIGATE <46247-0004>-SerialNumb---------------------------------------------
eth0 Link encap:Ethernet HWaddr 82:49:22:2B:82:A6
inet addr:10.63.191.28 Bcast:10.63.255.255 Mask:255.255.0.0
inet6 addr: fe80::8049:22ff:fe2b:82a6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:19565659 errors:0 dropped:83411 overruns:0 frame:0
TX packets:77491 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1376149850 (1.2 GiB) TX bytes:6030078 (5.7 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:412 errors:0 dropped:0 overruns:0 frame:0
TX packets:412 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:37684 (36.8 KiB) TX bytes:37684 (36.8 KiB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:10.12.0.15 P-t-P:10.12.0.15 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:11 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:424 (424.0 B) TX bytes:61 (61.0 B)Do you want to see Socket Statuses (Y/N) ? y
Press SPACE to page forward...
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 10.63.191.28:22 10.242.3.2:65199 ESTABLISHED
tcp 0 0 :::22 :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 14 [ ] DGRAM 2214 /dev/log
Press ENTER to continue...
...
Addr Name Dbg? Protocol Status
----- ---------------- ---- -------- ------
1 DNP3 Field Unit ON DNPMST00 Timeout
Enter RTU Address (-1 for all) ? 1
Enter 0=Disable : 1=Enable [Default=1] ? 1
After entering all information related to the task Debug Level modification, a single line output will indicate the change in status, and the list of tasks will generally be shown again.
Setting Scan-Rtu 1 to Enable Dump
================ Channel Diags ==============
ElecSys(V:5.7.2017-08-07-1200) Sun Sep 3 21:17:07 2017
UnitName : 1 @ 192.3.1.10 REDIGATE <46247-0004>-SerialNumb---------------------------------------------
Chan Name Status Rtus Time
==== ============== ======== ==== ==================
0 Channel0 w/Errors 1 Tue Dec 14 09:37:57 1999
1 Channel0 w/Errors 1 Tue Dec 14 09:37:56 1999
15 Channel15 Normal 1 Tue Nov 30 06:00:02 1999
Enter Channel (0 to 15) ?
Once you have modified the Debug level for all FieldUnits that you wish to change, press Enter to return to the Diagnostics Services menu, or enter another channel number.
Anchor | ||||
---|---|---|---|---|
|
...
Linux Diagnostic Commands
...