Page Comparison

Describes how to use the "Connect to Device" menu in ACE to view the RediGate diagnostic console.

1. In the ACE Configuration Editor, select File | Connect to Device.
2. If you are using an RS-232 or USB serial port, select the "USB/Serial" toggle button.
   If you have already set the IP address in the RediGate, select "Secure Shell (SSH)" to connect over the network.
      
   
   
3. For serial connections, select the correct Windows COM port.
   For IP connections, enter the IP address in the "Host Address" field. The Port will typically be 22.
   
   

4. Enter login credentials. This should be the User Name and Password currently configured in the RediGate, as shown in the "System" object of the ACE configuration

   Info
   By default, the username/password for general access is user/user. Please refer to your RediGate configuration to determine the correct username/password combination.

5. When you have successfully connected, you should see the following screen:
   
    

...