Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

  1. To set up PuTTY for network communication, run the PuTTY program and configure it to the correct IP address of your Director
  2. By default, the SSH port number is 22.  If you don’t know the IP address, consult a system administrator or visit http://partner.elecsyscorp.com and review the IP address on the default configuration that corresponds to your RediGate device
  3. You can enter a “Saved Sessions” name and click the Save button to save this session for future use, if you desire
  4. With the RediGate powered on, click the Open button to begin communication
  • No labels