Expand | ||||||
---|---|---|---|---|---|---|
| ||||||
|
...
After logging in to the MMI, the Main Manu is displayed.
================ Main Menu ==============
ElecSys(V:5.7.2017-07-24-1300) Wed Jul 26 22:20:20 2017
UnitName : 1 @ 192.3.1.10 REDIGATE <40170-0118>-SerialNumb
---------------------------------------------
1) System Services
2) Directory Services
3) Diagnostics Services
99 Log Off
Make selection:
...
Main Menu → System Services
The System Services menu is used to restart the system, change the system clock, view the status or enable/disable certain RediGate processes.
Enter 1 at the Main Menu for the System Services menu.
================ System Services ==============
ElecSys(V:5.7.2017-07-24-1300) Wed Jul 26 22:47:52 2017
UnitName : 1 @ 192.3.1.10 REDIGATE <40170-0118>-SerialNumb
---------------------------------------------
1) Boot/Reconfigure 2) Set Clock
3) Channel Status 4) Channel Enable/Disable
5) Channel Scan 6) Single Poll
7) RTU Enable/Disable 8) RTU Scan
9) RPN Calculator 10) New Master Key
11) Read Handshake Pins 12) Write Handshake Pins
13) Run Custom Utility 14) MQttClient to Next Broker
15) Cell Modem Diags
Make selection:
...
Main Menu → Directory Services
The Directory Services menu is used for various file operations within the RediGate file system.
Enter 2 at the Main Menu for the Directory Services menu.
================ Directory Services ==============
ElecSys(V:5.7.2017-08-07-1200) Thu Aug 17 06:32:10 2017
UnitName : 1 @ 192.3.1.10 REDIGATE <46247-0004>-SerialNumb
---------------------------------------------
1) Executables 2) Current Configs
3) Download Directory 4) Put File to Remote
5) Get File From Remote 6) Rename File
7) Delete File in Remote 8) Delete IsaGraf Files
9) View Zombie.log 10) IsaGraf App Info
11) Restore Previous UFF 12) View UFF Processing Details
13) View Load-Store File 14) View kernel or message logs
15) MQtt XML Information 16) View customer settings
17) ZMODEM File to Remote 18) ZMODEM File from Remote
19) View Problem.txt 20) View ModemLog.txt
21) Store-N-Forward File
Make selection:
1- Executables
Main Menu → Directory Services → Executables
...
Make selection: 19
Press 'Q' to quit, SPACE-BAR for next page
Sun Aug 27 15:44:48 CDT 2017
Multiple .xml.gz files cannot be translated
test1.xml.gz and test2.xml.gz
Sun Aug 27 15:51:25 CDT 2017
/home/director/2017-08-07-1200-redigate_7_3.15_32.tar.gz was not tagged for REDIGATE
Press ENTER...
20- View ModemLog.txt
...
(The Local IP address indicates a successful connection and the RediGate's address on the cellular network.)
→AT+CSQ...OK
<-+CSQ: 13,99\r\n\r\nOK
→ATDT#777...CONNECT
←CONNECT
Running pppd /dev/ttyEMUX0 230400 file /dev/null modem crtscts lock asyncmap 0 nodetach nodefaultroute noauth usepeerdnsUsing interface ppp0
Connect: ppp0 <--> /dev/ttyEMUX0
local IP address 75.242.97.94
remote IP address 66.174.62.1primary DNS address 198.224.147.135
secondary DNS address 198.224.146.119
Press ENTER...
21- Store-N-Forward File
Main Menu → Directory Services → Store-N-Forward
...
First, enter the Task Slot Number from the numbers that are listed. Depending on the task you have selected, you will have to enter a number of other information, starting with the new Debug Level that you wish to enable for this task. The Debug Level applies to all units associated with this task.
Task DNPMST00 Status ( All)
Valid Debug Level:
0 - Fatal Errors (Ending)
1 - General Errors (Error)
2 - Status Messages (Status)
3 - Data Display (Display)
4 - Data Dump (Dump)
Debug Level 0-4 or 'S'tats ? 4
...
Addr Name Dbg? Protocol Status
----- ---------------- ---- -------- ------
1 DNP3 Field Unit ON DNPMST00 Timeout
Enter RTU Address (-1 for all) ? 1
Enter 0=Disable : 1=Enable [Default=1] ? 1
After entering all information related to the task Debug Level modification, a single line output will indicate the change in status, and the list of tasks will generally be shown again.
Setting Scan-Rtu 1 to Enable Dump
================ Channel Diags ==============
ElecSys(V:5.7.2017-08-07-1200) Sun Sep 3 21:17:07 2017
UnitName : 1 @ 192.3.1.10 REDIGATE <46247-0004>-SerialNumb---------------------------------------------
Chan Name Status Rtus Time
==== ============== ======== ==== ==================
0 Channel0 w/Errors 1 Tue Dec 14 09:37:57 1999
1 Channel0 w/Errors 1 Tue Dec 14 09:37:56 1999
15 Channel15 Normal 1 Tue Nov 30 06:00:02 1999
Enter Channel (0 to 15) ?
Once you have modified the Debug level for all FieldUnits that you wish to change, press Enter to return to the Diagnostics Services menu, or enter another channel number.
Anchor | ||||
---|---|---|---|---|
|
...
Enter the new Debug Level that you wish to enable for this FieldUnit. set for Field Units on this Channel.
NOTE: the Debug Level applies to all Field Units of the same protocol under this Master Channel. (To see diagnostics for only some Field Units on a channel, you must disable diagnostics on the other units.)
Valid Debug Level:
0 - Fatal Errors (Ending)
1 - General Errors (Error)
2 - Status Messages (Status)
3 - Data Display (Display)
4 - Data Dump (Dump)
Debug Level 0-4 ? 4
Enter the FieldUnit Address to which enable at the above diagnostics status will be appliedlevel, or -1 to apply this change to for all FieldUnits on the channel.
Enter 1 to enable the diagnostics for the FieldUnit(s), or 0 to disable diagnostics.
...
Enter the new Debug Level that you wish to enable for the RTDB of on this FieldUnitMaster Channel.
NOTE: the Debug Level applies to all enabled Field Units under this Master Channel. (To see diagnostics for only some Field Units on a channel, you must disable diagnostics on the other units.)
Valid Debug Level:
0 - Fatal Errors (Ending)
1 - General Errors (Error)
2 - Status Messages (Status)
3 - Data Display (Display)
4 - Data Dump (Dump)
Debug Level 0-4 ? 4
...