...
- VPN.Start (R/W, Bool)
- Description: Starts the connection to the VPN server
- Message: {"d": {"VPN.Start": 1}}
- VPN.Stop (R/W, Bool)
- Description: Stops the connection to the VPN server
- Message: {"d": {"VPN.Stop": 1}}
- NAT.Restart (R/W, Bool)
- Description: Sends the latest NAT settings (NAT.IP_Port, NAT.PLC_IP) and refreshes current values
- Message: {"d": {"NAT.Restart": 1}}
- NAT.IP_Port (R/W, Int)
- Description: Port for which all traffic will forwarded to. For a list of common ports used for industrial communications protocols, see: Port Forwarding for Common PLC's
- Message: {"d": {"NAT.IP_Port": 44818}}
- NAT.PLC_IP (R/W, String)
- Description: IP address of the end device to which all IP traffic over the NAT.IP_Port will be forwarded
- Message: {"d": {"NAT.PLC_IP": "192.168.1.110"}}
- NAT.TUN0_IP (R, String)
- Description: IP address assigned by the VPN tunnel
- Message: READ-ONLY
- VPN.ConfName (R, String)
- Description: Name of the uploaded configuration file to look for in the home/director or home/Dirupld folders. All VPN configurations uploaded to the RediGate should be named OpenVPN_CONF.txt, or whatever value is set in the "PreInit Values" section of your VPN configuration:
- Message: READ-ONLY – values written to this tag will be overwritten on boot-up by the "PreInit Values" configuration on the RediGate
- Description: Name of the uploaded configuration file to look for in the home/director or home/Dirupld folders. All VPN configurations uploaded to the RediGate should be named OpenVPN_CONF.txt, or whatever value is set in the "PreInit Values" section of your VPN configuration:
- Nat.Eth1_IP (R, String)
- Description: IP address of the Eth1 port on the RediGate
- Message: READ-ONLY
- VPN.AuthName
- Description: Username credential for connecting to VPN server
- Message: {"d": {"VPN.AuthName": "Your_Username"}}
- VPN.AuthPass
- Description: Username credential for connecting to VPN server
- Message: {"d": {"VPN.AuthPass": "Your_Password"}}