Include Page | ||||
---|---|---|---|---|
|
Change Log
2019-05-17-1400
JPL SHA-256 checksum: BD272604D1CC9F042594C4BD1EAD145AA9FFD104556725DFBC04EA889451A006
RediGateMMI : Each time a Banner is displayed, then check if Reconfiguring
AutoProc : Looping of Event Files with Last Event / Jump to Last Event
JSON_Rbe : use GMT/UTC instead of localtime() for all CSV operations
CellLEDs : Problem if not UBLOX or (CoreMSQID == 0)
2019-04-04-1000 JPL
JSON_Rbe : From PRIORITY_HIGH-33 to PRIORITY_HIGH-397
UMUX : Sent AT+CEDRSX+3,2 ..3,2...3,5.. to disable Power Save Mode
: which could potentially disable inbound connections
RediGate400_configs.tgz : New from Jon Tandy with SARA-R4 enabled
cellmodem.tcl : From JPT. I forgot to update tarball with this file.
CellLEDs : Try twice to set AT+UGPS=1,0,3 for basic satellites
uff2lnux : From Valmet5?????.1.cfg to Valmet5Mast?????.1.cfg
SosMast : Read support of Omni-6K/7K Cmd-65
SRTPMast : More support of CPU-Regs in word and Bit modes
2019-03-28-1700 JPL
RediGateMMI : ALter Chan/Rtu in CustomReport option, can view CSV files
: from /tmp/sdcard1/SNF*/*.csv
enize : ENIZING for Schenck OpenSSL encryption
ROCMast : Fuller support of TypePnt-99 (Tables 0 - 15) Configurable
: OpCodes 10/11 reading and writing
CirrusRBE : Can process SARA-R4 GPS data. It could take up to two minutes
: to get GPS intialized
JSON_Rbe : Fixed bug in processing sdcard/*.csv historical files
start : Attempt to mount USB memory stick if SCDARD does not exist
nodir : rm Bootdelay in both /tmp/director, /tmp/redigate/
2018-12-12-1800 JPL
bootdelay : If ttyS0 interrupts occur within 15 seconds then wait up
: to 1.5 minutes before starting RediGate or Bootloader
SosMast : ASCII Modbus handles LRC errors without crashing
ModMast : Ditto
uff2lnux : UBlox SARA-R410 Verizon and AT&T support w, w/o UMUX
UMUX : Newest
RediGateMMI : Reverse video help text for Modem AT command
: Does not have AutoProc Debug level support yet.
dir_tool : Corrected format for UINT32 in RC_LIST, RJ_LIST
gwutl : JPT updates some error messages
NetMon.sh : Ditto
NetworkMonitor: Ditto
JSON_Rbe : Latest
ROCMast : Better processing of Echoed back PARAMETER header bytes
VirtMast : Latest, Correct RTU_STAT_POLL_DONE/WROTE_DATA
AutoProc : Fisrt Version
MQisdp : Newest
MQRbePr : Newest
DirectorXDBM : Newest
Ymodem : Newest
CirrusRBE : AutoProc support to publish TextFile as RBE String
SpkPlgRBE : Support AutoProc to publish TextFile as RBE String
RediGateMMI : Support for AutoProc diags per Proces Table Row
DirectorScan : If not OneBadPoll kills RTU then MS-DOS Epoch Seconds
start : mount -t vfat -o umask=000 /dev/mmcblk0p1 /tmp/sdcard/
2018-09-06-1000 JPL
ROCMast : More validation of certain OpCodes
hex2bin : for Schneck E-nizing.com encryption
NetMon.sh : JPT updated logging bug
NetworkMonitor: JPT updated
VirtMast : ENGINEERING_SCALE function
ModMast : Preliminary 64bit data reading w/o write
SosMast (NOT) : Preliminary 64bit data reading w/o write (pending testing)
JSON_Rbe : Cleaned up Historical file search of multiple days
dir_tool : produces output if "dir_tool -1 -1 DS" searches all RTU list
uff2lnux : Network Monitor changes, AutoProcess object support
RediGateMMI : RPN-Calc option 'FF' has Double-Hex, Hex->Double converts
2018-08-07-0800 JPL
uff2lnux : Removed some support for Sangoma
VirtMast : New POD_ENGINEER_SCALING function
2018-07-25-1400 JPL
RediGateMMI : Option-21 (Alter CSV StartTime) correctly display Month
CirrusRBE : Processes Header Only CSV files
uff2lnux : JPT Network Monitor Version 2
NetworkMonitor: JPT Initial Script
start : Added "NetworkMonitor restart" as last line
gwutl : JPT Gateway Utility Script
dir_tool : Latest
NetMon.sh : JPT background Network Monitor Script
2018-06-20-0900 JPL
JSON_Rbe : If column heading has EpochTimeMS then 64 bit integer time
: of MilliSeconds since 1969. Intelligent searching through
: CSV files for records to publish and publish all records
: not just the last two days.
CirrusRBE : ditto. Service mosquitt_loop() during searching.
SpkPlgRBE : Force UNDERSCOREs into RtuName. Implement ReconnectDelay.
StoreFwd : If Pacing is 0 seconds then store Milliseconds since 1969
: into first column with heading of "EpochTimeMS"
: If pacing=0 seconds then Millisecond timestamps
RediGateMMI : Directory Services allows user to modify Last CSV Time
root : call /etc/init.d/S01setuptimestamp update
S40crond : 55 **** /etc/init.d/S01setuptimestamp update
S01setuptimestamp : Make certain that clock is 2018 or better
uff2lunx : Support for multiple Network-Monitor Objects
MQisdp : Will adhere better to Reconnect Pacing
dir_tool : Latest
2018-05-22-1000 JPL
ArFunc.so.1.7 : Allow Single HReg write to >49999 address
JSON_Rbe : Allow Long ${GATEWAY} name
uff2lnux : Allow long ${GATEWAY} name in JSON Topics
S15cellmodem : kill tclsh added to all cases
StoreFwd : Better file managment at Midnight, Send today and yesterday
: data
TOTFLOMast : Support for DB-II Data Structure Groups 5,6,7
MQisdp : Removed spaces from URL Names and Gateway Name
2018-04-23-1400 JPL
StoreFwd : When no connection exists continuously check for Midnight
: for creating new starting CSV files, No alter for Timezone
DirectorScan : Support for SetOsVal and other updates
uff2lnux : List names of POD Functions 129 to 139. Ctl/Mon Netwrk Object
UffUpdate.txt : Move Ctl/Mon-Network object files to /etc/init.d/
TOTFLOMast : Don't abort POLL/CMD if SendMsg() fails from Broken PIPE
2018-03-13-1400 JPL
JSON_Rbe : THere was not enough checking if the MQttCLient buffer was
: too full
uff2lnux : Latest
dirprofile : added ":/sbin" into export $PATH
2018-02-20-2200 JPL
uff2lnux : Ublox-SARA-R cell modem support
UffUpdate.txt : CAT-M_PPP.sh, Dial.sh move to /etc/init.d/
UMUX : CAT-M modem multiplexer. Does not use virtual hanadshake
: Only send HDLC payloads of 107 byte, AT+CMUX=0,116...
S15cellmodem : If Modem_type=SARA-R4 call /etc/init.d/CAT-M_PPP.sh
2018-02-06-0900 JPL
TOTFLOMast : More diagnostics for 8 byte UNION. Continue 2018-01-26 tarbll
uff2lnux : MeasData support
JSON_Rbe : Even more TagName Command Searching validation
2018-01-26-1400 JPL
uff2lnux : Wesdac Protocol Support
TOTFLOMast : Support for RAMS Array 104 debugging. Allow for UCHAR+32
: Data Type to indicate UNION data of INT32/REAL32 pair to be
: after storing this UCHAR data. Real32 data regi will be
: counted as a INT32 register. Support RAMS arrays 148 to 158
RediGateMMI : Don't ask for CellModem port 73 to 77
2017-12-27-0900 JPL SHA-256 checksum: 792ED046E0275225609DD7630A0BB470A8B9869BB5853C0B27073E83DFCA14FB
CIPMast : Don't interpret "FLOTOTAL_100_Press" as "FLOTOTAL[100].Press
2017-12-13-1500 JPL
dirprofile : Some got "Director" text instead of "RediGate"
JSON_Rbe : Better management of Startup publishing
2017-12-12-1100 JPL
TOTFLOWMast : Sending a command could get into infinite loop
JSON_Rbe : Prevent double/triple publishes after New Broker Connection
2017-11-27-1200 JPL
JSON_Rbe : Device Management by subscribing to File topic with /DEVMAN/
: will allow subscribed files to stored into /tmp/director/
: and periodically a script will run to move to /home/director/
: Immediately pub all RTUs RBEs after Gateway Birth/State topics
TOTFLOMast : Added OPERATIONS APP and SU G4 LIQ APP Support.
: DTYPE_LONG: in ParseReply() was for only 2 bytes not four
Ymodem : Send file namess up to 127 bytes, debug to /tmp/ymodem.dbg
dirprofile : Added /sbin/ to path
GOOBL.sh : Get Out of BootLoader script
bootloader : Call GOOBL.sh
dirprofile : echo "reconfigure" or "reset" >/hom/dirctr/ in Bootloader mode
start : Process STAR files in /home/Dirupld/ and Multiples as well
MQisdp : Timestamp JSON/dir_tool subscribe files in /tmp/director/
: with Milliseconds
uff2lnux : Enable JSON_Leg0 under legacy MQisdp
2017-11-02-1700 JPL
JSONRbe : ProcessJSON() was not correctly check cmd StringLengths
CIPMast : Fragmented Reading and works up to 4000 bytes
2017-10-25-1700 JPL
TOTFLOMast : Added Shutdown App Register(59, Safety Application)
2017-10-25-1000 JPL
TOTFLOMast : Trend File APP needed to act like HoldReg APP for programmable
: data matching Polll Table Column used and inspecting RTDB Reg
CellLEDs : Removed double quotes around strings, support ATI for U-Blox
2017-10-11-1100 JPL
CIPMast : Support for 64bit "LINT" data type from L5XTool
SpkPlgRBE : CMD_MOD_STAT was breaking ipcmsg's with _fGotCmdModStat
CirrusRBE : Search for "/SNFCC_RRRRR/" for CSV Chan/Rtu numbers
StoreFwd : Remove Spaces from CSV file names
TOTFLOMast : RAMS App (Alarm Registers-8) support
2017-10-09-0900 JPL
RediGateMMI : Option-17 MQtt Status looks for 'SpkPlgRBE0'
CirrusRBE : Support Option-17 above, better rcvd-TagName validation
SpkPlgRBE : Ditto and if DNS-Ping fail, then netstat |grep 1883 |ESTAB
: WalkTable command from MMI
CellLEDs : better -SIGINT management
JSON_Rbe : more validation of Received TagName search/matching
uff2lnux : Allow TOTFLOMast Protocol=271 for SlotNumb and StationName-10
TOTFLOMast : Latest
S92leds : usleep 1000000 from sleep 1
2017-08-24-1000 JPL
uff2lnux : Possibility of multiple SpkPlgRBE, new ACE Structure
StoreFwd : Possibility of multiple SpkPlgRBE, new ACE Structure
CIPMast : Support for manually entered Multi-Level UDTs for single value
MQRbePR : Latest
MQXRbePR : Latest
CellLEDs : Release malloc() memory and close /dev/acscomm?? port
CirrusRBE : If cannot connect to broker release malloc() memory and
: after being killed
.profile : added ':/sbin' to export $PATH
RediGateMMI : Allow simple ENTER to abort CustUtil_* selection
2017-08-16-1500 JPL
TOTFLOMast : HoldingRegs APP has unknown DTYPE_??? to use whatever
: DTYPE_ associated inside the RTDB when DATA_SET_FORMATTED
Bootloader : changed from "dctr" uff header marker to "drct"
2017-08-11-0900 JPL
uff2lnux : Support for MultiRBE SparkPlugRBE
VirtMast : JSON_TRAP with correct Register Range Limit based on 'Count'
JSON_Rbe : No RBE Topics DiagMessage(Level-4), AWS Historical data
: SUB_TOPIC_TO_RTDB versus Protocol
SpkPlgRBE : Control process for CirrusRBE
CirrusRBE : Multiple RTU Support, control subscriptions of CMDs
StoreFwd : If SpkPlgB_EZ not found then look for SpkPlgRBE instead
2017-07-24-1300 JPL
VirtMast : New Poll 'Source Type' -> JSON COMMAND TRAP
JSON_Rbe : Accept DATA_SET_FORMATTED from VirtMast JSON_CMD_TRAP
: to enable a 'command' publish topic to Remote Device
: Allow new Replacement ${REG@xxxxx} to use Strings from
: Rtdb Regsiters @ 'xxxxx' (e.g. 49001) as replacements
: Convert <CR><LF><TAB> chars to <SPACE> for Wonderware
StoreFwd : Some Diagnostic changes, dynamically locate starting RBE
: Register instead of requirement of Coil 0001.
Xml2uff : Allow *.xml.gz files names from 128 to 256 bytes
bacnet4linux : 1st inclusion WEB server port 8000 of discovery data
BACnetIpMast : 1st inclusion
uff2lnux : BACnetMast needs SOS Table Size in both old/new NetCircuits
start : Added check for ../config/init.arcom/BACnetIpTool.sh
SpkPlgEZ : If DNS connection to Broker then ping test for only
: 4 seconds and the ping failure can force MQtt shutdown
SpkPlgEZ : If DNS connection to Broker then ping test for only
: 4 seconds and then ping failure can force MQtt shutdown
CirrusLink : Channel Number was not being read from the config file
: Double send Birth Certificates because of issues in DNS
: with DHCP after pulling the RJ-45 Ethernet cable
2017-06-29-1200 JPL
JSON_Rbe : ${CHAN},${RTU},${DEV} replacements. PUB/SUB topics for
: Device,Gateway,STATE,File(History?)
MQisdp : Allow for Topics up to 256 bytes
RbePush : Rotate through all four RBE Flags (0-3) each Interval
: or Individual RBE flags if Chan00 to Chan03
: Customer enters Interval in seconds
CellLEDs : Prevent TIME.GPS from getting large
MQRbePr : Topics up to 256 bytes, Publish TagNames w/o RETAIN, but
: send after every Gateway/Birth topic
2017-06-16-0900 JPL
uff2lnux : MQisdpX? replacement for ${REDIGATE}, ${DIRECTOR} ${GROUP}
MQisdp : 256 char Topics
2017-06-12-1400 JPL
CellLEDs : If no AT-Cmds[] then only regular AT+CSQ request
MQisdp : Wild card replacements
ModMast : If 32bit Format and 16bit RTDB regs then save pairs
dir_tool : Write /tmp/*.dtl for "-1 -1 DS" device status
VirtMast : Latest
MQisdp : More Wildcard placements from Global.txt
DirectorPLC : Latest
libmosquitto.so.1 : Required for CirrusLink
CirrusLink : SparkPlugB-EZ support
SpkPlgEZ : Manager for CirrusLink
uff2lnux : Support for JSON_Rbe, StoreFwd, S03emux -SIGINT CellLEDs
JSON_Rbe : Beta for BlueMix
StoreFwd : Logging to SD-Card1 and publish via SpkPlgEZ
PLC2Mast : Validate unsoliced Write-Cmd-8 DestAddres in byte[4?]
TANOMast : Removed some diags
2017-06-05-1800 JPL
MQRbePr : Publish TagNames WITHOUT 'Retain' flag
2017-06-02-1000 JPL
RediGateMMI : View Store-N-Forward files on sdcard/usb-stick
MQRbePr : Publish TagNames after EVERY Director-BIRTH
2017-04-10-0900 JPL
CellLEDs : SIGINT trap to remove ipcmsg() and then exit
: Flash LED even if PPP not running
S92leds : killall -SIGINT CellLEDs 2> /dev/null
CirrusLink : Beta ver of SparkPlug-B EZ for RBE deliver to Ignition
SpkPlgEZ : Control Process of CirrusLink to launch and kil
ModSlave : added SIGCHLD so system() call won't cause zombie process
DialBackup : Ditto
uff2lnux : Empty TagNames causes problems
2017-03-27-1100 JPL
ROCMast : Newest version
uff2lnux : Beta version of SparkPlug-B
2017-03-20-1500 JPL
OmronFINSMast : Added Timer/Counter FLG(Bool) and PV(Word)
2017-03-20-1300 JPL
OmronFINSMast : Added Expansion Banked(0-7) Data Memory (0x90 to 97)
2017-03-15-1100 JPL
xmlupdate : was creating $ConfigName.xml.xml.gz
OmronFINSMast : From 2012 but first release in 3.12 Linux
2017-03-09-1400 JPL
uff2lnux : Was not managing Dirupld password correctly
RediGate400_configs.tgz : New from JTandy
2017-03-08-1000 JPL
xmlupldate : Error to /home/*/Problem.txt if Multiple *.xml.gz files
DirectorWdog : umount /tmp/sdcard1/ /tmp/usb1/ if /home/director/reboot
VirtMast : all Functions CfgPtrs can be dynamic RTDB references
2017-03-01-1600 JPL
VirtMast : Enable TagNames as Column Headers in DATA_LOGGER
: Data can change TYPE and have Address Gaps
DialBackup : Some local values set to zero
DirectorWdog : If Dialbackup using VirtCOM? then LED controls prevent
: processing 'reset' or 'reconfigure' files
ModMast : Newest for Passthru Modbus aware for validations
TANOMast : Newest for RESET RTU command
PLC2Mast : Support for Peer Write 16bitWordPairs to 32bit RTDB Regs
SRTPMast : Force Local Source port to range 17000 to 17259 for OLD GEs
S91RediGate : case start) and stop) added with umount /tmp/sdcard1/
2017-02-23-1000 JPL
MELSECMast : For Denso project, read/write X,Y,M,D devices with RTDB
: Bool,Int16,Int32,Real32,String-32
2017-02-22-1000 JPL
VirtMast : if TS_ADC_AT_x100=1 then lower libdevmem(0x100 not 0x140)
ModSlTcpd : Newest
ModSlave : Close serial port after CMD_TERMINATE
RediGateMMI : Newest
xmlupdate : *.xml.gz and *.tmp.gz >> /home/*/AceConfigName.txt
customer.Z4 : TS_ADC_AT_x100=1 for VirtMast
PLC2Mast : PLC2 WRITE INT-PAIR to BE/LE WORD 32 bit RTDB
TANOMast : If ModbusCoil Write an OFF then don't send Command
MQisdp : Latest
DialBackup : Changed some Diagnostics
2017-01-31-0900 JPL
VirtMast : VirtMast correctly rejects LOW_PRIORITY Cmd(MSG_REPLY) or
: iCmdRespMSQID==MSQID_INVALID
dir_tool : Add 100 to Channel-Param to keep original file in
: PF (publish-file) command
cellmodem.tcl : If DE910 then from "S11emux" to "S03emux"
uff2lnux : TagName dots to slashes for Ignition.pub file
DialBackup : Resurected for PBF Energy
UdpHandler : Packet byte matching 0 to 5 to enable sending packet
ModMast : In PThru mode bottom 3 digits of ResponseTmout used for
: InterChar Demarkation
MQRbePr : Latest
UdpServ : Latest
2017-01-03-1400 JPL
uff2lnux : EIP TagName DOTs to SLASHES, 2 or More TagNams/Channel
CIPMast : RegSesn setup >60 seconds Idle Timer
VirtMast : POD_GetRTUSTATUS works now, all polls normall SUCCESSFULL
2016-12-29-1000 JPL
DnpMast : _fReconfigure
DnpSlave : _fReconfigure
SmartMux : _fReconfigure
customer.Z* : IM_IGNORE_QUALITY=0
VirtMast : All Polls successful, POD_QUALITYREG to set BAD quality
CIPMast : wStat uninitialized in UpdateMultiRTDB(), uSkipTest==NO_SAVE
uff2lnux : Latest
TOTFLOMast : Latest
UdpHandler : _fReconfigure, never ported to ARM processor
2016-12-08-1600 JPL
RediGate400_configs.tgz : From Jon Tandy
2016-12-05-1600 JPL
RediGate400_configs.tgz : From Jon Tandy
RMNOTLD.sh : Reset EMUX after 4 consec ppp0 restart w/o success
TANOMast : Diagnostic changes
PLC2Mast : Diagnostic changes
2016-11-28-1300 JPL
RegiGate400_configs.tgz : From Jon Tandy
S01setuptimestamp : Extract RediGate400_configs.tgz somewhere
TOTFLOMast : A few more Arrays supported
2016-11-17-1200 JPL
start : use ethtool to obtain SerialNumber for .serial
uff2lnux : CIPMast with SkipPoll options, SINT32 in TagName process
: MQrbePr Enable list, _alCustFlags[BASH_USES_TILDE]
: Subscriptions RBE-Data precedes RBE/RTU-BIRTH certificate
MQRbePr : ditto
MQisdp : Latest
MQRbePr : Latest
CIPMast : SKipReg, ResultReg Poll record processing, SKIP_SAVE_RTDB
: SKIP_EXTRACT_BIT (removed need for +100,000,+200,000 Markers
VirtMast : Improved DiagLog( |uIndex ), String Rplacement last byte
SRTPMast : Too much logic for Long Integers at 45001
cellmodem.tcl : Reprogramming if SIM changed
MQRbePr : Enable RTU List
DirectorPLC : SSCGP/MGLL XMl functions call lRequestSystemCmd()
customer.Z* : BASH_USES_TILDE=1
RediGateMMI : Newest
CellLEDs : Newest, works without AT Commands
DirectorXDBM : Fixed more RBE Stuff
RMNOTLD.sh : If cellmodem fails four times in a row then "S03emux restart"
dir_tool : Latest
TANOMast : Model 100/05 Tano with Spy Mode
PLC2Mast : Supports Spy mode with Unsolicited Write DF1
TOTFLOMast : ABB TotalFlow first Beta version
customer.Z4 : DIRUPLD_PASSWD=1
2016-05-02-1600 JPL
Bootloader : put "rdgt" into Override.UFF.
UffUpdate.txt : openconnect.* to /etc/vpnc/
ModMast : Allow full 16bit Ace RTU Address without breaking protocol
CSPMast : Writing to Bit-15 with cmd 0xAB also wrote Bit-0 next word
DF1Mast : ditto
TermServd : Remvoed Shared Resoure messages
uff2lnux : Newest
2016-04-12-0800 JPL
uff2lnux : TAG_NAMEs any length
2016-03-16-1700 JPL started 1st Linux REDIGATE 400 from Plains-PL
Change.log : First of REDIGATE 400 Series
REDIGATE-400 : New BRANDING name for Tarballs
customer.Z[2,4]: RediGate_400, REDIGATE_400=1
start.new : /tmp/redigate/ and RediGate.0.cfg and AceCfg.xml.gz file
: /home/Dirupld/*.XML.gz moved to /home/director/
uff2lnux : RediGate 400 throughout group with 'redigate'
: Any length TagName->sValue
syslog.conf : /tmp/redigate/RediGateFifo mapping
TarUpdate.txt : syslog.conf to /etc/ mode 0644, scripts/* -> /etc/stunnel/
: S01setuptimestamp to /etc/init.d/
TermServd : Eliminate "Could not semop(?) Success
.profile : 'ps|grep RediGateCore' and ${MYDIR#*RediGate.0.cfg}"
S90DirectorPipe: /tmp/redigate/*
S91Director : /tmp/redigate/*
RediGateCore : Copied from DirectorCore
RediGateMMI : Newly aware of REDIGATE-400
Xml2uff : Convert ACE 3.2 XML file to Apex.uff file
xmlupdate : Modified uffupdate to proces RediGate.xml.gz to UFF with
: ln -s ../config/Apex.uff -> /home/../RediGate.xml.gz.run
S01setuptimestamp : from P66 moved to /etc/init.d/
./scripts/*.sh : Moved to /etc/stunnel/
syslog.conf : /tmp/redigate/RediGateFifo
nodir : /tmp/redigate/Bootdelay
S50stunnel : killall -SIGKILL stunnel 2> /dev/null
VirtMast : Pod Multi-IO card index offset by one
DirectorPLC : libdevmem_open( +0x1a0 );
...