Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

When configuring your RediGate to act as a NAT (Network Address Translator), you mus set the default gateway of the PLC to match the IP address of the RediGate's Ethernet port that is connected to the PLC. 

  1. Set PLC's "Default Gateway" to match the IP address of the RediGate's Ethernet port
    1. SLC 500 →  RediGate Connected to SLC →  
    2. ControlLogix →  RediGate Connected to ControlLogix → 

 

PLCSoftwarePort Number
Allen-BradleyRSLogix 500044818
Allen-BradleyRSLogix 5002222
MitsubishiGXWorks

(Programmable, 1025)

   

 

 

  • No labels