Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

The easiest way to test RediGate network connectivity is by using the ping tool built-in to the RediGate diagnostics:

  1. Connect to the RediGate using Putty
  2. Enter the following commands
    1. 3 – Diagnostics Services
    2. 14 – Ping Service
    3. (IP address or domain of Host destination — 8.8.8.8 or google.com for example for internet connected devices)
    4. If you see a reply from the IP address you pinged, you are connected and ready to send data from your field device to your host platform
  • No labels