Skip to end of metadata
  • Created by Former user, last modified by Former user on Oct 26, 2018
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

In order to connect your device to a CDMA/EVDO network, you will need to know the MEID number (no SIM card is used). If you cannot locate MEID on the RediGate itself, you can recover it by connecting over putty.

  1.  SSH into your RediGate using Putty
  2. Navigating to the "Cell Modem Diags" section by entering the following commands
    1. 1 - (System Services)
    2. 15 - (Cell Modem Diags"
    3. 73 - (Diag AT Cmds
  3. These commands will take you to the following screen, where you will be able to retrieve the MEID of your cellular RediGate device. The screenshot below is of a GSM modem, so it has an "ERROR" where the MEID would be for a Verizon device.
  4. Once you have your MEID, you can call your provider and activate the RediGate

Security Note

If your RediGate has a public static IP address, you will want to immediately take extra security precautions to prevent unauthorized access attempts. Please review our Unauthorized Access on Public Static IP Addresses document to insure that your RediGate is properly protected.

  • No labels