Cellular Configuration - Verizon

Owned by Former user (Deleted)
Last updated: Oct 26, 2018 by Former user (Deleted)
1 min read

In order to connect your device to a CDMA/EVDO network, you will need to know the MEID number (no SIM card is used). If you cannot locate MEID on the RediGate itself, you can recover it by connecting over putty.

  1.  SSH into your RediGate using Putty
  2. Navigating to the "Cell Modem Diags" section by entering the following commands
    1. 1 - (System Services)
    2. 15 - (Cell Modem Diags"
    3. 73 - (Diag AT Cmds
  3. These commands will take you to the following screen, where you will be able to retrieve the MEID of your cellular RediGate device.
  4. Once you have your MEID, you can contact your provider and activate the RediGate.

Security Note

If your RediGate has a public static IP address, you will want to immediately take extra security precautions to prevent unauthorized access attempts. Please review our Unauthorized Access on Public Static IP Addresses document to insure that your RediGate is properly protected.