...
The RediGate does not seem to accepting the parameters of the latest configuration that was loaded.
Possible Causes
If you downloaded a configuration to the RediGate and left the "Deploy Immediately" button unchecked, you will need to power cycle the RediGate or manually run the "reconfigure" command in order for the RediGate to deploy the downloaded configuration. If you fail to deploy the uploaded configuration prior to download a new configuration, you will end up with multiple configurations in the RediGate's /home/director or /home/Dirupld directories. The RediGate expects only one configuration to be in either of these directories when it is rebooted or reconfigured, so having multiple configurations in a directory causes the RediGate to ignore the new uploaded configurations and keep its current configuration. If this occurs, the RediGate will log the error to the "Problem.txt" file.
Symptoms
- Problem.txt file information shows infothe following error:
Code Block title Problem.txt File Multiple .xml.gz files cannot be translated RG-400C-22_Ethernet_IP_Forwarding_V4.xml.gz and RG-400C-22_Ethernet_IP_Forwarding_V7.xml.gz Press ENTER...
- If there are 2 .xml.gz's (not including .run)
- If there are 2 .uff's (not including .run)
- The name of the configuration on the RediGate does not match the name of the last configuration that was downloaded to it
...