Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Current »

  1. Download and install the latest USB Driver from http://redigate.elecsyscorp.com/software
  2. Power on the RediGate, and connect a USB cable from the configuration computer to the console port on the front of the RediGate (USB type A male to Micro-USB type B male). The Windows operating system should recognize the port as a USB serial port.
  3. Open the Windows "Devices and Printers" window to confirm that the device appears as a "Silicon labs CP210x USB to UART Bridge," with a "COMx" port number designation, as shown in the following screen capture: 

 

  • No labels