Port Forwarding for Common PLC's

Owned by Former user (Deleted)
Last updated: Oct 30, 2017
1 min read

When configuring your RediGate to act as a NAT (Network Address Translator), you mus set the default gateway of the PLC to match the IP address of the RediGate's Ethernet port that is connected to the PLC. 

  1. Set PLC's "Default Gateway" to match the IP address of the RediGate's Ethernet port
    1. SLC 500 →  RediGate Connected to SLC →  
    2. ControlLogix →  RediGate Connected to ControlLogix → 

 

PLCPLCPort Number
Allen-Bradley (CompactLogix, Micro Logix 1100/1400, ControlLogix)RSLogix 5000, RSLogix 50044818
Allen-Bradley (SLC)RSLogix 5002222
MitsubishiGXWorks

(Programmable, 1025)

 

Â