ACE 'Connect to Device' Menu

Owned by Former user (Deleted)
Last updated: Oct 17, 2017 by Former user (Deleted)
1 min read
  1. In the ACE Configuration Editor, select File | Connect to Device.
  2. If you are using an RS-232 (RediGate 400 series)) or USB serial (RediGate 100 series) port, select the "USB/Serial" toggle button.
    1. You will want to make sure you select the COM port that corresponds to your RS-232 or USB serial driver.
  3. If you have already set the IP address in the RediGate, select "Secure Shell (SSH)" to connect over the network.


    1. For IP connections, enter the IP address in the "Host Address" field. The "Port" will typically be 22.

  4. Enter login credentials. This should be the User Name and Password currently configured in the RediGate, as shown in the "System" object of the ACE configuration. By default, the username/password for general access is user/user. Please refer to your RediGate configuration to determine the correct username/password combination:


  5. When you have successfully connected, you should see the following screen: