/
Edit IP Address of RG 400 Ethernet Port
Edit IP Address of RG 400 Ethernet Port
- To set the Ethernet properties, click on the "Ethernet 0" object
Set the Network Card IP, Subnet Mask, and Default Gateway appropriately for the network that you are using with the RediGate, leaving the other options default as shown below
DHCP
If you would like your Ethernet port to obtain it's address via DHCP, enter 0.0.0.0 for the Network Card IP, Subnet Mask, and Default Gateway
- Save your settings and upload the configuration to your device
, multiple selections available,
Related content
RediGate Firewall Configuration
RediGate Firewall Configuration
More like this
RediGate Configuration Manual
RediGate Configuration Manual
More like this
Example Configurations
Example Configurations
More like this
RediGate to Generic MQTT
RediGate to Generic MQTT
More like this
HART to RediGate Master
HART to RediGate Master
More like this
Updating your RediGate with the Latest Tarball
Updating your RediGate with the Latest Tarball
More like this