Setting Up Putty for USB Connection

Owned by Former user (Deleted)
Last updated: Jul 18, 2017 by Former user (Deleted)
1 min read

  1. Download and install Putty (http://www.putty.org/).
  2. Connect to PuTTY using the correct USB COM port at a speed of 115200.
  3. Click "Open" and then his the "Enter" key to start a new line

  4. Enter login credentials. This should be the User Name and Password currently configured in the RediGate, as shown in the "System" object of the ACE configuration

    By default, the username/password for general access is user/user. Please refer to your RediGate configuration to determine the correct username/password combination.

  5. When you have successfully connected, you should see the following screen:

    Â